Find all needed information about Apcupsd Snmp Support. Below you can see links where you can find everything you want to know about Apcupsd Snmp Support.
apcupsd-3.14.12 is a maintenance release that addresses a number of small issues in the previous version. It also contains a workaround for an UPS firmware issue that causes killpower to execute repeatedly in a loop, resulting in the UPS continually cycling power.
http://apcupsd.com/manual/manual.html
May 31, 2016 · Support for SNMP UPSes. To run apcupsd with a SNMP UPS, you need the following things: An SNMP UPS, for example a Web/SNMP (AP9716) or PowerNet SNMP (AP9605) card installed into the SmartSlot. Apcupsd also has support for some non-APC SNMP UPSes using RFC1628 or MGE MIBs, however the majority of the information in this section is for APC UPSes.
http://www.apcupsd.org/wordpress/about/
Apcupsd can be used for power mangement and controlling most of APC’s UPS models on Unix and Windows machines.Apcupsd works with most of APC’s Smart-UPS models as well as most simple signalling models such a Back-UPS, and BackUPS-Office. During a power failure, apcupsd will inform the users about the power failure and that a shutdown may occur.
https://sourceforge.net/p/apcupsd/mailman/message/28189170/
Does the AP9617 card not support such a snmp shutdown trap? I saw starting the apcupsd using snmp and power up the UPS once a short message "ONBATT" and a "POWER-BACK" event, which maybe a side effect of the UPS self test, which was scheduled at power on. That maybe another indication that apcupsd don't use any shutdown trap.
https://sourceforge.net/p/apcupsd/mailman/message/32200955/
What would really put this issue to bed (from an apcupsd perspective) is a capture of the SNMP datagram as it came in from the UPS. That would clearly show if the UPS is sending the wrong value or if apcupsd's ASN.1 parser has a bug. If I give you a sourcecode patch to add SNMP packet dumps to the apcupsd log, can you compile apcupsd to use it?
https://en.wikipedia.org/wiki/Apcupsd
Apcupsd is the free software equivalent of the APC's proprietary software called Powerchute. As of version 3.14.0, Apcupsd has support for the PowerChute Network Shutdown function as well as many other features. Apcupsd runs in daemon mode so to keep a live connection with the UPS.License: GPL
https://support.auvik.com/hc/en-us/articles/205162620-How-to-enable-SNMP-on-APC-UPS-devices
Oct 24, 2019 · How to enable SNMP on APC UPS devices. Ray Patel October 24, 2019 01:09. Follow. ... If you’d like help configuring your specific APC device, contact Auvik support. Example SNMP configuration for an APC Smart-UPS 1500. Navigate to Configuration > Network > SNMPv1 > Access.
https://kb.paessler.com/en/topic/63674-how-can-i-monitor-an-apc-ups-that-does-not-support-snmp
Aug 05, 2019 · Using appropriate OIDs, you can also monitor additional counters of APC UPS hardware with custom SNMP sensors. If you have, for example, an older APC UPS device that only has a serial monitoring port, you cannot use the default SNMP APC Hardware sensor …
http://www.apcupsd.org/manual/manual.pdf
Need to find Apcupsd Snmp Support information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
