Does Not Support The Interfaces Mib

Find all needed information about Does Not Support The Interfaces Mib. Below you can see links where you can find everything you want to know about Does Not Support The Interfaces Mib.


Does not support interfaces MIB - IBM Blade Cen... THWACK

    https://thwack.solarwinds.com/thread/32368
    i didn't have to do much since the Orion MIB database had most of what i needed for the IBM BLADE chassis/components monitoring. our SAN is EMC CLARiiON and SNMP is minimal with their MIBs. at least it does do SNMP TRAPS for drive failures. we do not have any Nortel.. if the Orion MIB database didn't (or doesn't) get what you need at discovery time then you can …

Node does not support the interface MIB THWACK

    https://thwack.solarwinds.com/thread/19825
    Jul 25, 2008 · I naturally assumed that if it didn't work in system manager that it wouldn't work using the web interface. I was apparently wrong. Just for consistency you might want to consider taking the interface MIB requirement out of System Manager. As always, if you need some devices to play with that don't support the Interfaces MIB just let me know.

SNMP Counters: Frequently Asked Questions - Cisco

    https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/26007-faq-snmpcounter.html
    Aug 24, 2007 · The variables previously listed that do not say they appear in show interfaces are not available anywhere other than SNMP. Examples. This example uses a 3640 that runs with Cisco IOS Software Release12.2(2)T1. The Read-Only (RO) Community String used is public and the Read-Write(RW) Community String used is private.

Net-SNMP

    http://www.net-snmp.org/mibs/interfaces.html
    For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0.

Interface Index (ifIndex) Persistence - Cisco

    https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/28420-ifIndex-Persistence.html
    Oct 26, 2005 · In Cisco IOS release 12.0S, interface index persistence support started from Cisco IOS release 12.0(11)S on the following platforms: Cisco 7200 Series. Cisco 7500 Series. Cisco 12000 GSR Family. Note: For CatOS devices, ifIndex does persist automatically for physical and VLAN interfaces, but not for EtherChannel interfaces. This feature is on ...

Standard SNMP MIBs Supported by Junos OS - TechLibrary ...

    https://www.juniper.net/documentation/en_US/junos/topics/concept/standard-mib-overview.html
    T Series,PTX Series,MX Series,M Series,ACX Series,SRX Series,vSRX,EX Series,QFX Series. Junos OS supports the Standard MIBs listed in Table 1.

yang/ietf-interfaces.yang at master · YangModels/yang · GitHub

    https://github.com/YangModels/yang/blob/master/vendor/cisco/xe/1671/ietf-interfaces.yang
    For any interface that does not support protocol: multiplexing, this counter is not present. Discontinuities in the value of this counter can occur: at re-initialization of the management system, and at: other times as indicated by the value of 'discontinuity-time'."; reference "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";} leaf out ...

RFC 2863 - The Interfaces Group MIB (RFC2863)

    http://www.faqs.org/rfcs/rfc2863.html
    Network Working Group K. McCloghrie Request for Comments: 2863 Cisco Systems Obsoletes: 2233 F. Kastenholz Category: Standards Track Argon Networks June 2000 The Interfaces Group MIB Status of this Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements.

yang/ietf-interfaces.yang at master · YangModels/yang · GitHub

    https://github.com/YangModels/yang/blob/master/vendor/cisco/nx/9.2-1/ietf-interfaces.yang
    interface that does not support protocol multiplexing, this counter is not present. Discontinuities in the value of this counter can occur: at re-initialization of the management system, and at: other times as indicated by the value of 'discontinuity-time'."; reference "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";} leaf out-octets

SNMP MIBs Support - TechLibrary - Juniper Networks

    https://www.juniper.net/documentation/en_US/junos/topics/concept/snmp-mibs-qfx-series.html
    QFabric System,QFX Series,OCX1100,EX4600. MIBs Supported on QFX Series Standalone Switches and QFX Series Virtual Chassis, MIBs Supported on QFabric Systems



Need to find Does Not Support The Interfaces Mib information?

To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.

Related Support Info