Ethtool Support In The Base Drivers

Find all needed information about Ethtool Support In The Base Drivers. Below you can see links where you can find everything you want to know about Ethtool Support In The Base Drivers.


Linux* Base Driver for Intel® Gigabit Ethernet Network ...

    https://www.intel.com/content/www/us/en/support/articles/000005480/network-and-i-o/ethernet-products.html
    The Linux base drivers support the 2.4.x, 2.6.x and 3.x kernels. These drivers include support for Intel® Itanium® 2 Processor-based systems. These drivers are only supported as a loadable module. We don't supply patches against the kernel source to allow for static linking of the drivers.

Intel NIC Family Version 18.3.0 Linux Base Drivers ...

    https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=x4mg9
    - Intel(R) X710/XL710 devices now support IEEE '1588 L4' packets. - Intel(R) X710/XL710 devices now have added PF support for up to 16 queues with VF drivers. - Intel(R) X710/XL710 devices now support "ethtool -m" command to display SFP+/QSFP+/SFP28/QSFP28 modules. - Added support for PHY and MAC loopback enabled on Intel(R) X710/XL710 devices.

Basics of Ethernet Bonding in Linux – The Geek Diary

    https://www.thegeekdiary.com/basics-of-ethernet-bonding-in-linux/
    Ethtool support in the base drivers for retrieving the speed of each slave. Base driver support for setting the hardware address of a device while it is open. High Availability in a Multiple Switch Topology. With multiple switches, the configuration of bonding and the network changes dramatically. In multiple switch topologies, there is a trade ...

linux bonding and dell switch - Dell Community

    https://www.dell.com/community/Networking-General/linux-bonding-and-dell-switch/td-p/2769702
    I'd like to use mode 4 of the linux bonding (mode4 = 802.3ad) IEEE 802.3ad Dynamic link aggregation. Creates aggregation groups that share the same speed and duplex settings. Utilizes all slaves in the active aggregator according to the 802.3ad specification. Pre-requisites: 1. Ethtool support i...

Linux* Base Driver for the Intel(R) Ethernet Controller ...

    https://www.kernel.org/doc/html/v5.1/networking/device_drivers/intel/i40e.html
    Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters ... and for the latest NVM/FW images and Intel network drivers, refer to the Intel Support ... is used to synchronize clocks in a computer network. PTP support varies among Intel devices that support this driver. Use “ethtool -T <netdev name>” to get a definitive list of PTP ...

Linux Base Driver for 10 Gigabit Intel(R) Ethernet Network ...

    https://www.kernel.org/doc/html/v5.1/networking/device_drivers/intel/ixgb.html
    Oct 01, 2018 · The following Intel network adapters are compatible with the drivers in this release: Controller Adapter Name Physical Layer ... the name for the Linux Base Driver for the Intel 10GbE Family of Adapters is ixgb. ... The ethtool version 1.6 only supports a limited set of ethtool options. Support for a more complete ethtool feature set can be ...

Drivers & Software - HPE Support Center.

    https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f6c1a93c89eb4904b3ef05fab8
    The Linux drivers now include "ethtool" support. The HP Tested and Approved Linux 802.1q VLAN Driver no longer has a memory leak during reads of the /proc/net/vlan file system. The basic statistics pages of the Windows 2000 and Windows 2003 Network …

Network Card Bonding On RedHat - Linux.com

    https://www.linux.com/tutorials/network-card-bonding-redhat/
    May 14, 2009 · * Prerequisite: Ethtool support in the base drivers for retrieving the speed of each slave. mode=6 (balance-alb) Adaptive load balancing: includes balance-tlb plus receive load balancing (rlb) for IPV4 traffic, and does not require any special switch support. The receive load balancing is achieved by ARP negotiation.

11.8. Ethtool Red Hat Enterprise Linux 6 Red Hat ...

    https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/deployment_guide/s1-ethtool
    We present here a short selection of often used ethtool commands together with some useful commands that are not well known. For a full list of commands type ethtool -h or see the man page, ethtool(8), for a more comprehensive list and explanation. The first two examples are information queries and show the use of the different formats of the ...

How to Set up Network Bonding in Ubuntu 6.10

    https://www.howtoforge.com/network_bonding_ubuntu_6.10
    How to Set up Network Bonding in Ubuntu 6.10 Why you may want to do this: Network Bonding, otherwise known as port trunking allows you to combine multiple network ports into a single group, effectively aggregating the bandwidth of multiple interfaces into a single connection.Author: Stutch



Need to find Ethtool Support In The Base Drivers information?

To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.

Related Support Info