Find all needed information about Fitting Rigid Felt Support Trays. Below you can see links where you can find everything you want to know about Fitting Rigid Felt Support Trays.
https://www.youtube.com/watch?v=XukZhqz9AF4
Sep 09, 2010 · fitting of underfelt support tray to prevent ponding of roof felt. 1. push back first row of roof tiles 2 lift felt from top of fascia board 3 slide support tray up under felt so as to support it ...Author: Gutterman Bernard Hill
https://www.roofingsuperstore.co.uk/product/rigid-felt-support-trays.html
This rigid felt support tray is manufactured from PVC to provide an immediate and cost effective solution to protect the eaves. Known as an eaves tray or eaves protector, this rigid felt support tray will protect the eaves where damage to the roof underlay or felt has occured.
https://www.diydoctor.org.uk/forums/lifting-row-of-slates-at-eaves-to-retro-fit-support-tray-t24902.html
Feb 18, 2011 · Eaves trays can be fitted retrospectively with minimal repairs as follows: 1. Take one slate out of the second course approximately 1.3m from either end of the roof, then take out the two below it and the eave slates. 2. This will allow you to slide the eaves tray along the top of the fascia and under the felt all the way to the end.
https://guttermanblog.blogspot.com/2010/09/fitting-eaves-skirt-or-underfelt.html
Sep 08, 2010 · The rain water eventually rots the felt and then causes rot in the eaves. The solution is to insert a rigid support tray either pvc or aluminium to support the felt from the rafter to the top of the fascia board and out into the gutter. ... fitting eaves skirt or underfelt support tray.Author: Gutterman
http://quotationcheck.com/eaves-felt-price/
Eaves felt is located at the lowest part of the roof and usually overlaps into the guttering. This felt often rots and fails, in some circumstances, this can lead to roof leaks. Eaves felt is almost always replaced when the roofline fascias are replaced, plastic trays can be used as they never rot.
http://manthorpebuildingproducts.co.uk/product/g1280-felt-support-tray
Fitting Requirements. The G1280 Felt Support Tray should be used with timber fillets. The front “bobble” edge should be dressed down towards the gutter and either stapled or nailed into position. The first “bobble” of each tray should be used to locate the over lap, felt should be dressed over the G1280 Felt Support Tray as normal.
Need to find Fitting Rigid Felt Support Trays information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
