Find all needed information about Ppp Support For Sync Tty Ports. Below you can see links where you can find everything you want to know about Ppp Support For Sync Tty Ports.
https://wiki.gentoo.org/wiki/PPP
PPP support for sync tty ports ppp_sync_tty Support for synchronous devices. Finally you need to rebuild linux, install and boot new kernel with PPP support. Configuration. Provided eth0 following lines should be added for PPPoE connection: FILE /etc/conf.d/netAdd:
https://www.acmesystems.it/ppp
PPP over GPRS or HSPA link. This article illustrates how to set-up a TCP/IP link using the PPP protocol over a GPRS or HSPA network ... PPP filtering *> PPP support for async serial ports > PPP support for sync tty ports > PPP Deflate compression > PPP BSD-Compress compression > PPP MPPE compression (encryption ) (EXPERIMENTAL) > PPP over ...
https://www.unix-ag.uni-kl.de/~leonard/linux-n6600-howto.html
[*] PPP filtering <M> PPP support for async serial ports <M> PPP support for sync tty ports <M> PPP Deflate compression <M> PPP BSD-Compress compression <M> PPP over Ethernet (EXPERIMENTAL) Sure, not all are needed. As I have compiled everyting statically, I can't easily test which ones are needed. bluez-support in the kernel: <M> L2CAP ...
https://wiki.gentoo.org/wiki/Handbook:X86/Installation/Kernel
Device Drivers ---> Network device support ---> <*> PPP (point-to-point protocol) support <*> PPP support for async serial ports <*> PPP support for sync tty ports The two compression options won't harm but are not definitely needed, neither does the PPP over Ethernet option, that might only be used by ppp when configured to do kernel mode PPPoE.
https://github.com/torvalds/linux/blob/master/drivers/net/ppp/Kconfig
config PPP_SYNC_TTY: tristate "PPP support for sync tty ports" depends on PPP---help---Say Y (or M) here if you want to be able to use PPP over synchronous (HDLC) tty devices, such as the SyncLink adapter. These devices: are often used for high-speed leased lines like T1/E1. To compile this driver as a module, choose M here. endif # TTY: endif ...
http://pptpclient.sourceforge.net/howto-gentoo.phtml
These are instructions for installing PPTP Client on Gentoo Linux. Summary: use Linux kernel 2.6.15 or later, use pppd 2.4.2 or later, without MPPC, without patching, ... PPP support for async serial ports [M] PPP support for sync tty ports [M] PPP Deflate compression [M] PPP BSD-Compress compression [M] PPP MPPE compression (encryption) (NEW ...
https://github.com/etu/gentoo-hardware-notes/blob/master/12d1:1506_Huawei_Technologies_Co._Ltd._Modem_Networkcard.org
Mar 22, 2014 · Notes about hardware I had to mess around with go get running. - etu/gentoo-hardware-notes
https://www.linuxjournal.com/article/8185
Mar 24, 2005 · Begin by compiling the kernel with support for Bluetooth and PPP, found in Device Drivers > Networking Support: <M> PPP (point-to-point protocol) support [ ] PPP multilink support (EXPERIMENTAL) [ ] PPP filtering <M> PPP support for async serial ports <M> PPP support for sync tty ports < > PPP Deflate compression < > PPP BSD-Compress ...
https://www.toradex.com/blog/how-to-use-gsm-3g-4g-in-embedded-linux-systems
May 18, 2016 · CONFIG_PPP: PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other serial) lines. Ask your access provider if they support it, because otherwise you can't use it; most Internet access providers these days support PPP rather than SLIP.
https://devtalk.nvidia.com/default/topic/1036503/jetson-tk1/tk1-use-the-usb-4g-modem-but-can-t-find-the-ttyusb-who-can-help-me-/
Jun 13, 2018 · TK1 use the USB 4G modem,but can't find the ttyUSB*,Who can help me.
Need to find Ppp Support For Sync Tty Ports information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
