Find all needed information about Sca 1200 Support Removal System. Below you can see links where you can find everything you want to know about Sca 1200 Support Removal System.
http://www.supportremoval.com/
SCA-1200HT is specifically designed for the removal of soluble support materials on 3D printed parts. The units are compatible with all Stratasys soluble support materials and corresponding build materials in conjunction with all recommended support removal concentrates – ABS, ASA, PC, …
https://aetlabs.com/product/support-cleaning-apparatus-sca-1200/
The SCA 1200HDT Support Cleaning Apparatus system is required for removing support material from parts made with Stratasys’s Soluble Support Technology.
https://store.amtekcompany.com/support-cleaning-aparatus-sca-1200ht/
SCA-1200HT is ideal for removing support material from bigger 3D-printed models. Its sizable basket can hold parts up to 254 x 254 x 304.8 mm (10 x 10 x 12 in). That means it can clean a single large part, or multiple smaller parts in its roomy tank – saving time when multiple projects are in the queue.
https://www.smg3d.co.uk/3d_scanners/stratasys_dimension_sca-1200_support_removal_sy
Stratasys Dimension SCA-1200 Support Removal System The SCA-1200 is designed to remove support material from 3D models created with Stratasys Dimension 3D Printers that use Soluble Support Technology (SST). This advanced cleaning system washes away supports to reveal your fully functioning 3D model.
http://cimetrixsolutions.com/products/clean-stations/sca-1200
SCA-1200 is designed to remove support material from 3D models created with Dimension 3D Printers that use Soluble Support Technology (SST). This advanced cleaning system washes away supports to reveal your fully functioning 3D model. The SCA-1200's proven technology uses an optimized nozzle...
https://www.padtinc.com/mautic/asset/60:sca-1200ht-sheet-20180605pdf
The SCA-1200HT is specifically designed for the removal of soluble support materials on 3D printed parts. The units are compatible with all Stratasys soluble support materials and corresponding build materials in conjunction with all recommended support removal concentrates – ABS, ASA, PC, Nylon, and PolyJet Resins.
https://www.padtinc.com/supportremoval/assets/sca_1200ht_user_manual_rev_3.pdf
The Support Cleaning Apparatus (SCA) is a device specifically developed to provide robust and efficient removal of support material from parts created with3D printers from Stratasys, Inc. that utilize their Soluble Support Technology (SST).
https://www.padtinc.com/supportremoval/assets/sca_user_manual_01_rev_3.pdf
SCAUM-01 REV 3. 11 SCA User Manual. 6: Understanding your SCA. The Support Cleaning Apparatus (SCA) is a device specifically developed to provide robust and efficient removal of support material from parts created in Dimension 3D printers from Stratasys, Inc. that utilize their Soluble Support Technology (SST).
http://www.supportremoval.com/
SCA-1200HT is specifically designed for the removal of soluble support materials on 3D printed parts. The units are compatible with all Stratasys soluble support materials and corresponding build materials in conjunction with all recommended support removal concentrates – ABS, ASA, PC, …
https://store.amtekcompany.com/support-cleaning-aparatus-sca-1200ht/
SCA-1200HT is ideal for removing support material from bigger 3D-printed models. Its sizable basket can hold parts up to 254 x 254 x 304.8 mm (10 x 10 x 12 in). That means it can clean a single large part, or multiple smaller parts in its roomy tank – saving time when multiple projects are in the queue.
https://aetlabs.com/product/support-cleaning-apparatus-sca-1200/
Support Cleaning Apparatus (SCA-1200) The SCA 1200HDT Support Cleaning Apparatus system is required for removing support material from parts made with Stratasys’s Soluble Support Technology. Specifications are as follows: SCA 1200HDT Support Cleaning Apparatus -One Year Warranty -UL, CSA, CE Approved -100-240VAC/50/60Hz; 10A -46.3 Liter (12.2 Gallon) Tank Capacity.
https://www.smg3d.co.uk/3d_scanners/stratasys_dimension_sca-1200_support_removal_sy
Stratasys Dimension SCA-1200 Support Removal System The SCA-1200 is designed to remove support material from 3D models created with Stratasys Dimension 3D Printers that use Soluble Support Technology (SST). This advanced cleaning system washes away supports to reveal your fully functioning 3D model.
http://cimetrixsolutions.com/products/clean-stations/sca-1200
SCA-1200 is designed to remove support material from 3D models created with Dimension 3D Printers that use Soluble Support Technology (SST). This advanced cleaning system washes away supports to reveal your fully functioning 3D model. The SCA-1200's proven technology uses an optimized nozzle...
https://www.padtinc.com/supportremoval/assets/sca_1200ht_user_manual_rev_3.pdf
The Support Cleaning Apparatus (SCA) is a device specifically developed to provide robust and efficient removal of support material from parts created with3D printers from Stratasys, Inc. that utilize their Soluble Support Technology (SST).
https://www.padtinc.com/supportremoval/assets/sca_user_manual_01_rev_3.pdf
SCAUM-01 REV 3. 11 SCA User Manual. 6: Understanding your SCA. The Support Cleaning Apparatus (SCA) is a device specifically developed to provide robust and efficient removal of support material from parts created in Dimension 3D printers from Stratasys, Inc. that utilize their Soluble Support Technology (SST).
http://www.supportremoval.com/sca---troubleshooting-guide-and-faq.html
You can use tap water to fill the SCA tank, there is no reason to use distilled or filtered water. For fastest soluble support removal use WaterWorks Soluble Concentrate P400SC; for gentler cleaning, use the EcoWorks cleaning solution. Both cleaning solutions are …
https://www.padtinc.com/mautic/asset/60:sca-1200ht-sheet-20180605pdf
The SCA-1200HT is specifically designed for the removal of soluble support materials on 3D printed parts. The units are compatible with all Stratasys soluble support materials and corresponding build materials in conjunction with all recommended support removal concentrates – ABS, ASA, PC, Nylon, and PolyJet Resins.
http://www.supportremoval.com/
The SCA-1200HT’s versatility and efficient cleaning performance result from PADT’s experience as a user and distributor of the SCA and Stratasys FDM systems since their introduction. The most widely used agitation based support removal system on the market, the SCA-1200HT is proven in the field as a truly easy to use solution.
https://www.smg3d.co.uk/3d_scanners/stratasys_dimension_sca-1200_support_removal_sy
Stratasys Dimension SCA-1200 Support Removal System The SCA-1200 is designed to remove support material from 3D models created with Stratasys Dimension 3D Printers that use Soluble Support Technology (SST). This advanced cleaning system washes away supports to reveal your fully functioning 3D model.
https://aetlabs.com/product/support-cleaning-apparatus-sca-1200/
Support Cleaning Apparatus (SCA-1200) Home / Buy Stratasys 3D Printer Packages / Support Cleaning Stations / Support Cleaning Apparatus (SCA-1200) The SCA 1200HDT Support Cleaning Apparatus system is required for removing support material from parts made with Stratasys’s Soluble Support Technology.
https://store.amtekcompany.com/support-cleaning-aparatus-sca-1200ht/
The SCA-1200HT dissolves support from 3D models created on any of the Stratasys 3D Printers that use Soluble Support Technology (SST). The SCA-1200HT’s optimized nozzle and pump designs circulate the heated cleaning solution in and around the models dissolving away the SST material.
http://cimetrixsolutions.com/products/clean-stations/sca-1200
This speeds the removal of supports on all types of models regardless of part geometry. System owners agree - it's a great choice for cleaning support material from product mockups, functional prototypes and end-use parts. Large capacity for large parts, multiple parts. SCA-1200 is ideal for removing support material from bigger 3D-printed models.
https://www.padtinc.com/mautic/asset/60:sca-1200ht-sheet-20180605pdf
all recommended support removal concentrates – ABS, ASA, PC, Nylon, and PolyJet Resins. Engineered to Work Since the launch of the original SCA-1200 in 2008, PADT has successfully manufactured and supported the SCA family of cleaning systems for users worldwide. User experience was applied to improve the product, resulting in the SCA-1200HT
http://www.supportremoval.com/sca---troubleshooting-guide-and-faq.html
Removal time is highly variable and depends on part geometry, part size, cleaning solution used, pH of cleaning solution, and material type. Until some experience is gained, estimate four to five hours. Parts can be checked during the cleaning cycle and removed from the SCA if support is dissolved before the end of the set time.
https://www.padtinc.com/supportremoval/assets/sca_1200ht_user_manual_rev_3.pdf
robust and efficient removal of support material from parts created with3D printers from Stratasys, Inc. that utilize their Soluble Support Technology (SST). This is an improved model based on the feedback received from SCA users in the Stratasys 3D Printer community. The original SCA system was developed with input from Stratasys, users and
http://www.padtinc.com/supportremoval/assets/sca-1200ht-spec-sheet-1.pdf
Optimized Performance in a Durable System The SCA-1200HT can dissolve support from all the SST-compatible materials you use – ABS, PC, and nylon. The SCA-1200HT’s versatility and efficient cleaning performance result from PADT’s experience as a user and distributor of the SCA and Stratasys FDM systems since their introduction.
Need to find Sca 1200 Support Removal System information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
