Find all needed information about Slic3r Support Material Pattern Spacing. Below you can see links where you can find everything you want to know about Slic3r Support Material Pattern Spacing.
https://manual.slic3r.org/expert-mode/support-material
Pattern Spacing determines the distance between support lines, and is akin to infill density apart from being defined only in mm. If changing this attribute take into account the width of the support extrusion and the amount of support material that will adhere to the object.
https://groups.google.com/d/topic/atxhs-discuss/qoziBy1M3kI
This solved my issue with supports not coming apart easily. I'm sure those well versed with Slic3r may already know this but, adding a couple interface layers and adding spacing between those layers really helps prevent support material from sticking to the print.
https://manual.slic3r.org/expert-mode/print-settings
A value of 20% is usually the minimum required to support flat ceilings. Slic3r offers several fill patterns which will be discussed in more depth in section - Infill Choices. ... The Pattern spacing option determines how dense the support material is printed. ... Support material - These are used if any support material (including rafts and ...
https://github.com/slic3r/Slic3r/issues/2916
Jun 15, 2015 · In slic3r the spacing between support and object have a default value. But with some prints you can need to change this default value to get a better result .It also depend of the material you are using : supports with PLA don't need the same spacing as supports with ABS.
http://www.trenchphysics.com/?p=7
Pattern spacing: Slic3r sets the default at 2.5 mm. Setting the spacing lower is going to use more support material and make it harder to remove afterward. Adjust this if your overhangs are close to 90 degrees and its a small piece. Pattern angle: Pattern angle adjusts the rotation of the pattern of the support material. Sometimes the pattern ...
https://3dprinting.stackexchange.com/questions/1199/smooth-finish-in-slic3r-using-support-material
I'd say the clue is the material itself and the geometry of the object. But in terms of Slic3r settings you could experiment with: (print settings >> support material) pattern spacing (he has here something around 5mm) pattern (I'd say the best for you is rectlinear) contact z distance (choose 0.2 or close to that)
http://www.soliwiki.com/Enabling_Support_Material
Enabling Support Material in Slic3r . How to enable support material in Slic3r. ... Choose the pattern spacing. A small number gives dense support for overhangs and a large number gives minimal support. The default is 2.5mm. 5. Slice your model up into GCode, and print!
http://www.soliforum.com/topic/3613/lets-talk-about-slic3r-support-material/
Sep 06, 2013 · Let's talk about Slic3r support material (Page 1) — Solidoodle Discussion — SoliForum ... I can change the density of the support by changing the pattern spacing, but changing the threshold angle doesn't seem to make any difference. ... then projects remaining triangles onto x-y plane to find support area, then uses spacing in some way to ...
Need to find Slic3r Support Material Pattern Spacing information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
