Find all needed information about Smartmontools Usb Support. Below you can see links where you can find everything you want to know about Smartmontools Usb Support.
https://www.smartmontools.org/wiki/Supported_USB-Devices
Smartmontools USB Device Support. For a general overview of smartmontools's USB support, see USB devices and smartmontools.. The following tables list USB devices that have been successfully or unsuccessfully (below) tested with smartmontools.
https://www.smartmontools.org/ticket/327
This USB bridge does not implement the ATA pass-through SCSI commands supported by other Prolific USB bridges. It may implement another vendor-specific command. Adding this to smartmontools would require documentation from the vendor.
https://sourceforge.net/p/smartmontools/mailman/message/22033081/
> Skymaster 8632 IDE/SATA auf USB 2.0 Adapter > > Now the only device from this list, which is also featured on > smartmontools' USB-Support wikisite is: > > Digitus DA-70148-1 > > So please, if anyone has made experiences with one of the featured > devices, please add your experiences to the wikisite! > > From the devices on your list, I have ...
https://www.smartmontools.org/ticket/1221
ASMedia ASM2362 provides a vendor specific NVMe pass-through SCSI command. This should be supported by smartmontools via a new -d TYPE option (e.g. -d sntasmedia). A possible USB-Id is 0x174c:0x2362. See also the original report on smartmontools-database list.
https://sourceforge.net/p/smartmontools/mailman/smartmontools-support/thread/[email protected]/
Aug 19, 2009 · [smartmontools-support] Genesys Logic Inc USB->SATA/PATA SAT support semi-working. From: Tim Small <tim@bu...> - 2009-08-10 18:11:54. Hello, I have the following USB mass-storage device: Bus 005 Device 013: ID 05e3:0718 Genesys Logic, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level ...
https://www.smartmontools.org/ticket/242
This USB bridge does not implement any of the ATA pass-through SCSI commands supported by smartmontools. It may implement another vendor-specific command. Adding this to smartmontools is not possible without documentation from the vendor. The ATA compliance of an USB bridge does not imply that full pass-through access to all ATA commands is ...
https://sourceforge.net/p/smartmontools/mailman/message/19459703/
Jim Kleckner wrote: > The recent patches for atacb support for USB drives > with Cypress chipsets are exciting. > > Very often you are trying to deal with drives using a > USB2.0 bridge like the one from Vantec. > > Can you describe how we can tell whether smartctl > will work with some form of pass-through for a given > hardware configuration? > > How can we tell if there is a Cypress chipset ...
Need to find Smartmontools Usb Support information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
