Switch Support Multicast

Find all needed information about Switch Support Multicast. Below you can see links where you can find everything you want to know about Switch Support Multicast.


Multicast Catalyst Switches Support Matrix - Cisco

    https://www.cisco.com/c/en/us/support/docs/ip/ip-multicast/29480-167.html
    Feb 26, 2019 · GMRP and RGMP Catalyst Switches Support Matrix Refer to the IP Multicast support page for additional information on implementing the multicast feature and for sample configurations and troubleshooting tips.

Multicast support - Cisco Meraki

    https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Multicast_support
    Navigate to Switch > Configure > Routing and DHCP. Select or Add an interface. Enter Name, Interface IP, and VLAN. Under multicast support, selection Enable IGMP snooping querier. Click Save.

Solved: Multicast Switch Requirement - Cisco Community

    https://community.cisco.com/t5/switching/multicast-switch-requirement/td-p/1536603
    IGMP snooping catalyst support . If you don't have a switch that supports it and you don't have a L3 interface you can enable PIM on then unless you want all mutlicast to be treated as broadcast you willl have to statically assign the multicast mac-address to the relevant switch ports but obviously this means you cannot have dynamic membership ...

Configuring network infrastructure to support the NLB ...

    https://support.microsoft.com/en-us/help/4494444/configuring-network-infrastructure-to-support-the-nlb-operation-mode
    Apr 05, 2019 · To support this configuration, you must configure the network infrastructure to use static ARP entries and MAC address table entries. Network switches cannot learn the NLB multicast MAC address in the course of their usual operations. If you skip the manual configuration step, the network switches may flood NLB traffic to all ports or drop packets.

Overview of IP Multicast [IP Multicast] - Cisco Systems

    https://www.cisco.com/en/US/tech/tk828/technologies_white_paper09186a0080092942.shtml
    The most appropriate switches have a switch architecture that allows multicast traffic to be forwarded to a large number of attached group members without unduly loading the switch fabric. This allows the switch to provide support for the growing number of new multicast …

Multicast Does Not Work in the Same VLAN in Catalyst Switches

    https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/68131-cat-multicast-prob.html
    Nov 16, 2006 · The multicast source is connected to Switch 1, which is a Catalyst 6500 Switch with Supervisor Engine 720 that runs Cisco IOS Software. Receiver 1 is connected to Switch 1, and Receiver 2 is connected to Switch 2. Switch 2 is a Catalyst 3750. There is a Layer 2 link, either access or trunk, between Switch 1 and Switch 2.

What is the state of multicast support in consumer grade ...

    https://stackoverflow.com/questions/9379100/what-is-the-state-of-multicast-support-in-consumer-grade-routers
    Are you talking switches or routers? In a consumer setting I suspect switches. My experience is that they all support multicast, though not at wire speed. Also the cheap ones tend to broadcast any multicast traffic to all ports (no IGMP snooping).



Need to find Switch Support Multicast information?

To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.

Related Support Info