Find all needed information about Ancon Stone Support Systems. Below you can see links where you can find everything you want to know about Ancon Stone Support Systems.
https://www.ancon.co.uk/products/masonry-support/stonework-support/
Ancon MDC/S System Ancon MDC/S Stonework Supports are based on the MDC masonry support system. The bracket height and depth are varied to suit the cavity size and the loadings. The dimensions of the angle are selected to suit the stonework to be supported.
https://www.ancon.com.au/products/masonry-support/stonework-support
The Ancon SSB Bracket supports and restrains stonework with a facing thickness of between 25mm and 40mm. They can be positioned in either the vertical or the horizontal joints and allow adjustment without the need for shims.Location: 98 Kurrajong Avenue, Mount Druitt, NSW 2770, Sydney
https://www.ancon.co.uk/products/masonry-support
AnconOptima and Ancon MDC Systems create a continuous length of angle to support the outer leaf of masonry. AnconOptima is a standard system where the brackets and angles are supplied as separate components. Ancon MDC systems have brackets welded to the angle and are designed to suit the specific cavity width and masonry load of a project.
https://www.ancon.co.uk/products/wall-ties-restraint-fixings/restraints-for-stone-cladding
Ancon Push–Off Bolt This fixing provides the centre of stone panels with additional resistance to the effects of impact loads, blast loads and positive wind pressure. Its mechanical expander fixes securely into the inner leaf while the neoprene pad cushions the external stone panel and prevents rattling. Lengths to suit 100-200mm.
https://www.ancon.co.nz/products/masonry-support/stonework-support
The Ancon SSB Bracket supports and restrains stonework with a facing thickness of between 25mm and 40mm. They can be positioned in either the vertical or the horizontal joints and allow adjustment without the need for shims. Ancon Soffit Fixing. Ancon Soffit fixings are a simple and secure method of fixing thin facing slabs.Location: 2/19 Nuttall Drive, Hillsborough, 8022, Christchurch
https://www.ancon.co.uk/products/
Brick, block or stone cladding on steel or concrete framed structures is normally supported by stainless steel masonry support systems. Masonry Support Ancon Lintels are manufactured from stainless steel and do not require any further corrosion protection.
https://www.ancon.co.uk/products/masonry-support/bespoke-bracket-angle-support/
Ancon MDC Bracket Angle Support System - Ancon MDC masonry support systems are tailored to suit individual contract requirements based on the cavity width and masonry load to be carried. Ancon MDC Nexus Brick Faced Support System - Used to create feature brick faced soffits; lighter, faster and with perfect alignment. Related Links. Contact Ancon
https://downloads.halfen.com/catalogues/usa/media/catalogues/naturalstonesystems/fs-us.pdf
Worldwide Leader In Natural Stone Support Systems HALFEN When natural or reconstituted stone has been chosen as a cladding material it is necessary to give consideration to the following key areas for the purposes of choosing the most appropriate connec-tion system: Type of …
https://www.ancon.com.au/
Ancon provides structural fixings to a broad range of construction sectors Supporting high-strength, secure road and bridge construction – from long-span crossings to pedestrian footbridges. Roads & …
https://www.ribaproductselector.com/Product.aspx?ci=302&pr=Ancon-Masonry-SupportAnconMDCBracketAngleMasonrySupportSystem
Ancon masonry support systems can be fixed directly to uncased structural steel frames. For cavities larger than 75 mm there may be a requirement for additional fixings near external corners. Horizontal slots should be provided in the steel edge beam stiffeners to allow lateral tolerance.
Need to find Ancon Stone Support Systems information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
