Find all needed information about Asa Etherchannel Support. Below you can see links where you can find everything you want to know about Asa Etherchannel Support.
https://community.cisco.com/t5/firewalls/etherchannel-on-asa/td-p/1340158
EtherChannel support (ASA 5510 and higher) You can configure up to 48 802.3ad EtherChannels of eight active interfaces each. Note You cannot use interfaces on the 4GE SSM, including the integrated 4GE SSM in slot 1 on the ASA 5550, as part of an EtherChannel.
https://www.cisco.com/c/en/us/td/docs/security/asa/asa912/configuration/general/asa-912-general-config/interface-echannel.html
The device to which you connect the ASA EtherChannel must also support 802.3ad EtherChannels; for example, you can connect to the Catalyst 6500 switch or the Cisco Nexus 7000. When the switch is part of a Virtual Switching System (VSS) or Virtual Port Channel (vPC), then you can connect ASA ...
https://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/interface_start.html
Nov 14, 2018 · The ASA does not support connecting an EtherChannel to a switch stack. If the ASA EtherChannel is connected cross stack, and if the Master switch is powered down, then the EtherChannel connected to the remaining switch will not come up. All ASA configuration refers to the logical EtherChannel interface instead of the member physical interfaces.
https://community.cisco.com/t5/firewalls/etherchannel-support-for-asa-5585x/td-p/2350818
Solved: Hi there , Just trying to find out which all versions of ASA 5585X can support etherchannel features . Thanks Prabs
http://www.amirmontazeri.com/?p=18
Mar 05, 2013 · Hi Amir !.. Nice Post.. Thanks for that! I am new to ASA firewall series. What is the algorithm the etherchannel use in it .As because in normal catalyst switch it uses either a source ip or mac..or dest ip or mac… like the on returning a packet from asa to the catalyst which algorithm it follows to perform the etherchannel…
https://www.techrepublic.com/blog/data-center/configure-etherchannel-on-cisco-asa-to-increase-bandwidth-and-achieve-ha/
In this post I'll show you how to get more bandwidth with your Cisco ASA, as well as an added bonus of high availability. The solution is Etherchannel and it became available on the ASA in version ...
https://community.spiceworks.com/topic/1945600-3750g-to-asa5506-port-channel
Dec 04, 2016 · If the ASA is on the edge or directly behind the edge router the only traffic going there should be traffic that is going off-net. The amount of traffic going to the internet must be HUGE if it is determined that etherchannel is required. Likewise the link to the internet must be large if the etherchannel traffic is to make full use of it.
https://networkengineering.stackexchange.com/questions/25035/how-to-achive-switch-redundancy-between-asa-cluster-control-link
The ASA does not support connecting an EtherChannel to a switch stack. If the ASA EtherChannel is connected cross stack, and if the master switch is powered down, then the EtherChannel connected to the remaining switch will not come up. There are a couple of diagrams which follow.
https://netcraftsmen.com/etherchannel-mac-persistency-and-the-3850-switch-stack/
Dec 12, 2019 · For example, the ASA 9.1 configuration documentation states: The ASA does not support connecting an EtherChannel to a switch stack. The next line of the docs somewhat explains why: If the ASA EtherChannel is connected cross stack, and if the Master switch is powered down, then the EtherChannel connected to the remaining switch will not come up.
https://www.youtube.com/watch?v=YTBjXuWOaAk
Mar 08, 2013 · In ASA you can configure up to 48 EtherChannels in turn each channel group can have eight active interfaces. ASA supports LACP protocol (IETF std) but doesn't support PAGP (cisco proprietary).Author: NETWORKERS HOME
Need to find Asa Etherchannel Support information?
To find needed information please read the text beloow. If you need to know more you can click on the links to visit sites with more detailed data.
